I should have mentioned earlier my experiences were with a CDI ( MHKZ ) system ..........
Not that it matters , and not that anyone would be particularly interested. ......... but I believe as mentioned before that I removed the stop relay as the wiring generally ( not just the relay ) going into that multi block connector was becoming brittle and generally tired .........
There wasn`t much free play in the wiring to cut back to a fresher length , so I dumped the relay as it`s wiring " doubled up " with other connections going into the block .... so removing the relay simplified things , and gave me a more secure fixing now that the worn connections were no longer doubled up .........
It was only supposed to be a temporary measure , but stayed that way for quite a while .......... I think I also remember that this meant the engine would continue to run after I had switched the ignition key to off ...... ( surprise surprise ) ......... I would have overcome this by eliminating engine tickover ...... so it died as soon as the throttle was shut ..........
All this was pre-DMC2 , obviously .........
I believe very early triples had no stop relay fitted , which meant the lawn mower generator which Laverda fitted was always " live " ...... so anyone who wanted a triple could walk up to a parked one , bump start it and ride off down the road ....... ( I think Dave Minton mentioned this once in an article ........ so take it with a pinch of salt if you wish ......... maybe this was just the early pre-production bike that he rode ) ........
I was quite proud of the DMC2 when I fitted it .......... I gutted the 1200`s tool tray behind the battery and rubber mounted a 1.5 mm or something thick sheet of stainless vertically in it`s place ........ mounted the DMC unit and matchbox rectifier onto that ...... fed the nice new wiring up past where that multi block connector used to be ......... and fashioned another sheet of stainless to fit onto the old black box mounting points to mount the coils onto .......... all connected with nice simple wiring and chunky new connectors .........
All neat and tidy , even if I say so myself .................
The only thing was the position of the coils on the mounting plate meant the whole thing had to be removed if you wished to lift the cam cover ....... ( lack of clearance ) .......... I was going to fashion a MK 2 plate , with the coils mounted further up and out of the way ......... but then I went and sold the bloody bike after forty years and a quarter million miles ..........

...............
I hope the current owner appreciates all the effort I put in ............... ( Generator pick up and coil plate wiring was starting to get a bit iffy though ....) ......