Victor Reinz head gasket

While I am waiting for a few parts to arrive from Wolfgang, including a new head gasket, I came across this head gasket by 'Victor Reinz'. I found it in its original packaging, tucked away in a drawer in my garage; I had forgotten all about it. This is the first time I actually took a look at it, and it appears to be all metal with a very thin grey film of something sprayed over both surfaces; the 4 stud holes where the 'O' rings fit are quite large. The sprayed-on film is very thin and is cracking near the edges. The gasket itself does not lie flat even though it was stored flat. Does anyone have experience with this product? I bought it around 10 years ago. 1794871106472.png1794871157715.png
 
Victor Reinz is most probably not the manufacturer of the actual gasket, the german company is a major supplier of gasket materials to the entire european auto industry. Bottom line... top quality stuff.

AfaIk, VR materials are used by both Athena and Centauro, both supply gasket sets for the Breganze models.

Doesn't need to be flat, it'll flatten nicely when the head is torqued. It is actually a common composite gasket with a wire weave within the asbestos-like paper(?) with steel rolled-in flame rings. OE Laverda gaskets had either copper or copper-plated flame rings.

piet
 
Back
Top