750 - Clutch Plates - Options
- Thread starter Haggis
- Start date
Rusty Spokes
Hero member
- Location
- Decatur, Ga. USA
I think..as I recall...the LW MotionPro cables are PE polyethylene lined.
My health and professional responsibilities would prohibit me from offering the LW clutch cable service..sorry Vince.
I went back and looked for the contact and price from MotionPro.
My email and MotionPro price from 2008. It is possible Toby is not there anymore after ten years. I doubt the price is $41 USD too:
In most cases we can duplicate most motorcycle cables but we do run into applications for some that we can?t. The cost to duplicate your cable would be $35 in the stock coil wound type housing or $41 in the upgraded longitudinally wound type housing plus the cost of shipping. The difference between the two being that instead of a single strand of wire wrapping around the inner liner and wire making up the housing as in a coil wound housing you have several strands of wire with the LW housing that run parallel with the inner wire and liner. You end up with a cable that has a smoother operation and resists housing compression over time, which leaves you with less adjusting over time and better performance.
We currently have a window of 7 to 8 working days to build the cables once we process the order plus the time of shipping. We do require the order to be pre-paid by credit card and the ship to address be the same as the billing address for the credit card. All of our orders are considered special orders with a no return policy, unless for warranty consideration.
If you would like to send the cable in to be duplicated, you?ll want to include a brief note with some contact information in the package and ship it to:
Motion Pro Inc. Attn: Custom Cables
867 American Street
San Carlos, Ca 94070
If you have any further questions or concerns you can reach me at the contact information listed below.
Thanks,
Toby
phone: (650) 594-9600 ext. 119
fax: (650) 594-9610
www.motionpro.com
Toby@motionpro.com
My health and professional responsibilities would prohibit me from offering the LW clutch cable service..sorry Vince.
I went back and looked for the contact and price from MotionPro.
My email and MotionPro price from 2008. It is possible Toby is not there anymore after ten years. I doubt the price is $41 USD too:
In most cases we can duplicate most motorcycle cables but we do run into applications for some that we can?t. The cost to duplicate your cable would be $35 in the stock coil wound type housing or $41 in the upgraded longitudinally wound type housing plus the cost of shipping. The difference between the two being that instead of a single strand of wire wrapping around the inner liner and wire making up the housing as in a coil wound housing you have several strands of wire with the LW housing that run parallel with the inner wire and liner. You end up with a cable that has a smoother operation and resists housing compression over time, which leaves you with less adjusting over time and better performance.
We currently have a window of 7 to 8 working days to build the cables once we process the order plus the time of shipping. We do require the order to be pre-paid by credit card and the ship to address be the same as the billing address for the credit card. All of our orders are considered special orders with a no return policy, unless for warranty consideration.
If you would like to send the cable in to be duplicated, you?ll want to include a brief note with some contact information in the package and ship it to:
Motion Pro Inc. Attn: Custom Cables
867 American Street
San Carlos, Ca 94070
If you have any further questions or concerns you can reach me at the contact information listed below.
Thanks,
Toby
phone: (650) 594-9600 ext. 119
fax: (650) 594-9610
www.motionpro.com
Toby@motionpro.com