750 Dellorto 36mm slides?

helicopterjim

helicopterjim

Hero member
Location
near Lone Butte, BC, Canada
Hello. I've been trying to find the information on the carb slides and needles for an SF ....... so far I have found Laverdamania says K1 needles are correct but Paradies shows K2 needles ...... can anyone confirm? Also found a reference somewhere that K6 will work but I forget where I read that ....
As for the slides ...... Paradies shows 50/3 slides with 50/1's as an option ...... also read that 60/3's will work OK.

Also ....... I would like to know what the 74' SFC had for slides and needles .... my SFC no longer has the PHB's ..... and they are long gone (too bad, eh).

Any help would be appreciated.
 
Hi, Jim.
For SF1-3 it's 50/3 and K2 originally.
Consider that new slides will have to be modified
to fit, see this thread: http://www.laverdaforum.com/forum/index.php/topic,83047.msg176429.html#msg176429
Some suppliers will do that for you, if you tell
them you have older carbs.

hth
Ernesto
 
Thank you Ernesto. I have one 50/3 slide so I guess I'll be doing some shopping. The needles I know I can find easy enough.

Not too worried about modifying slides ..... I have both new and old style so I can figure out what needs removing.

cheers
Jim
 
I wouldn't be at all worried about the 2nd number (the .../1,2,3) - that refers to the accelerator pump actuation relative to throttle opening and I (and many on this forum will agree) remove the pump levers and throw them away - you won't notice any difference (except a lighter throttle action).
 
BlackJota1978 said:
I am looking to purchase 2 - 50/3 slides for my 750 restoration. The ones I have are
worn on the "engine side". Have tried Gowanloch but they are out of stock. Anyone
else in Aus stock them?
Click to expand...

yes, in stock

 
You must log in or register to reply here.
Back
Top