750 DMC ignition

[phil37]

  just trying to fire up an imported SF - it's got DMC2 ignition - I can't see any adjuster hole on this unit as I gather you can set curve to "0" and test for spark. it's got "DMC2+Norm" on the box - does this have the adjuster facility? Anyone got a wiring diagram so I can do some testing? - Thanks - Phil

 

[Harry Lime]

I've got 3 x pdf files of scanned manuals if you PM me an email address.

DMC 1 Manual
DMC 2 fitting
DMC general instructions

I think there's a link somehwere on t'internet, but I can't find it.

Doh! Just found your email - sent 'em.


H.

 

[phil37]

Thanks John - Very useful - but still need a wiring diagram for the 750 - Regards - Phil

 

[Harry Lime]

Have one in my hand.....and my scanner's broken.

Bear with me

H.

 

[Harry Lime]

Let's try this....

 

[Harry Lime]

Have scanned the 750 DMC manual and chucked it onto the Coppermine / Gallery place.

H.

 

[redax5]

Phil,
The selector hole is underneath the box, or better way to describe it, on the same side as the 4 studs.
Depending on how it has been mounted you sometimes have to unbolt the unit to get to it.
Should have a rubber bung in the hole.

Good luck
Red

 

[phil37]

Thanks John - just what I need -
  Thanks Red - the box is mounted close to the m/guard - can't see the hole ATM - will remove and adjust - Regards - Phil

 

[Dean Brown]

Phil, I have a 750 with a DMC ignition sat here if that helps. 

 

[phil37]

Thanks Dean - I should be OK now - but handy you're just up the road - Thanks - Phil

 

[phil37]

All OK now - the "Croatian Cracker" is running well!! - Just need to put a cable choke assy on it as the flip up set up  makes starting  a bit difficult ATM  - Regards - Phil