Mirage - removing rear caliper

olslewfoot

olslewfoot

New member
Location
Norwich, Norfolk, UK
The rear caliper on my mirage is mounted on a plate secured at the rear by the rear wheel axle and at the front by engaging in a slot in the swinging arm.
The rear caliper mounting bolt won't withdraw as it's obstructed by the web on the swinging arm  where the lower shock absorber mounts.
Is it really necessary to remove the whole caliper and mounting plate together or am I being dense and missing something?
Cheers
John
 
John,

The caliper is mounted on an aluminium arm that pivots on the rear axle.
The front of the arm is clamped to the swing arm by a bolt. Loosen this bolt all the way, so the arm can move.
Then, undo the rear axle nuts.
Loosen the adjusting screws on the chain tensioners ( chrome brackets on the back of the swing arm)
Now the rear wheel can be slid forwards, and you can get at the caliper mounting bolts.

Have fun,
Steve
 
Thanks Steve
I thought the front location was locked in the slot and wouldn't rotate. That explains it!
It's some time since I had the rear wheel out or worked on the rear brake.
Cheers
John
 
You must log in or register to reply here.
Back
Top