new chain and sprockets needed

Andychain on here should help with chain,Sprockets unlimited in UK

or OCT should help here ,very helpful on the phone.

http://www.octeam.de/
 
Rear sprocket alledgedly (so double check) from a 1981 to 1986 GSX400 Suzuki. Front is a different story, haven't found a conversion yet.

Regards, Greg
 
ghwallice said:
Rear sprocket alledgedly (so double check) from a 1981 to 1986 GSX400 Suzuki. Front is a different story, haven't found a conversion yet.

Regards, Greg
Click to expand...
Why did you need a conversion? You can still buy them
 
Cosi said:
He's a skirt wearer  :P
Click to expand...

Haven't seen him wearing white boots though... :D

andychain said:
I know Keith Nairn been helpful with sprockets in the past, by the way why no
mention of him on the forum
Click to expand...

Keith won't touch those Zane thingys with a barge pole... and I don't blame him!

Can't imagine GSXR400 rears to fit, reckon the smallest available would be in the 44-46T range.  Lav has 42 iIrc.

Sprockets available off the shelf at OCT.

piet
 
sfcpiet said:
Can't imagine GSXR400 rears to fit, reckon the smallest available would be in the 44-46T range.  Lav has 42 iIrc.
Click to expand...

Renthal Part number 250 U520 40 was discontinued in 2012.

B&C Express now manufacture under licence to Renthal. They have 250-520-43HA (43 tooth) on the shelf. 43 tooth is probably not a bad alternative as when I dropped my Zanes from 16 to 15 they were a lot more usable at Australian Crawl (100klm/h). They look pretty (nice gold colour) and are 60grams lighter than the OEM.

B&C Express Ltd
Station Road                                   
Potterhanworth
Lincoln
LN4 2DX

Tel:  +44 (0) 1522 791 369
Fax: +44 (0) 1522 794 262

www.bandcexpress.co.uk

Regards

Greg

 
chrisk said:
it's not widely known, but Greg's got a mountain of Zane spares. http://www.thedam.com.au/The_DAM/DAM_Laverda_Parts.html
Click to expand...

Probably about 2500kg of bits for the bloody things, but I am not selling for a while.

BUT I AM BUYING if you have Zane parts collecting dust.

On top of that, I'll try and help with support, but there are a lot of lads that are better than me.

Regards, Greg
 
LJ said:
shipping from Oz though to Lancashire isn" t really an option.
Click to expand...

Well I have just had some gear from Greg shipped to Lancashire! Despite fall in pound prices are still good and delivery took 11 days. Couple of the bits were made by Greg himself and its all quality kit.
 
Macca said:
Well I have just had some gear from Greg shipped to Lancashire! Despite fall in pound prices are still good and delivery took 11 days. Couple of the bits were made by Greg himself and its all quality kit.
Click to expand...

It wasn't this Greg...
 
You must log in or register to reply here.
Back
Top