RGA/RGS Brake m/c + 2x front calipers - will it fit 3CL (Ceriani's)

[Laverdaton]

As title really, there are a pair of front calipers and a front brake master cylinder on eBay at the moment - two separate auctions.
I emailed the seller to ask if the mounting holes are threaded - there not.
Would they fit on my bike with Ceriani's - with slight modification (ensuring positive location)? or should I hold out for F08's.

Is it anyone on here selling these?

Andy

 

[MarnixSFC]

You can use them if you put helicoils in them but you may need a shim to centre them properly on the disc.

Marnix

 

[Ernesto]

Hi, Andy.

Perhaps a request in the "Wanted" section below could
lead to success, would be even more obvious.
Some guys have modified  their brakes ,e.g. with 4-pot
calipers  and might be willing to part with the original ones,
(if they still have them.)
You could also try one of the breakers, e.g. Ralf in Berlin
(info@rooaring70s.de). Should have somebody in your country,
too.
A tip for the overhauling: when getting the old bleeders out, be
very careful. They are easily broken.

hth
Ernesto

 

[lemonjelly]

I m selling them they came with my bike after upgrade was already done by previous owner to 4 pots are these  Brembo PO8s??

Shaun