RGS clutch slave O-ring

[murphus]

What's the correct cross-section for the 30mm clutch slave O-ring?

 

[sfcpiet]

3.53 x 29.75mm

piet

 

[gpacs]

Note: Do not fit an ordinary Buna N Nitrile O-ring with brake fluid.
Use Butyl, or ethylene propylene, or teflon, virgin ... there's a couple of others that are OK.
You can also buy using a Laverda Part number 55130116
https://damclassicracing.com.au/55130116-o-ring-clutch-piston-30mm-3-5mm/

 

[murphus]

Thanks