SF3 brakes too stiff

[sfcpiet]

Hmm was thinking about this today when out and about on the RGS might do that to the rear, get the thing resleeved down a size so as to take the uselessness out of it.

Brett,

Are you aware that 2 different actuating levers (the one that goes through the footrest bracket) and M/Cs were used for the RGS?  If these are not paired correctly, the brake remains hopeless...

piet

 

[2622]

Hi Piet
Yeh I did know that there were two different arms am sure that have checked that out before and compared to the Corsa's but then again perhaps someone swapped the master at some time. Funny the Executive has the best of the lot and know that last time was stateside took some measurements.
Might have to have another look, and am sure that I do have another set up on the shelf somewhere.
Cheers and thanks.

 

[sfcpiet]

Brett,

Parts book states lever #43 311 188 as being 55mm, #43 311 181, 39mm.  M/C #47 222 121 = PS15N, #47 222 129 = PS12N.

Logic would have the longer lever paired with the smaller M/C.

piet