Rockitdoc
Hero member
- Location
- Fort Collins, Colorado
Ok, more progress on the re-assembly:
1. Tested starter relay and it works! It even drives the starter!
2. Now, time to connect everything else. Question: my alternator has two of each of the yellow and blue/white wires (four total + the green/white wire) but only one wire of each (blue/white and yellow) coming out of the voltage regulator. When I took the bike apart, one of the blue/white and one of the yellow were tied off and not connected to anything. Should I do that again, or run both yellows and both blue/whites into the one connector coming off the regulator?
1. Tested starter relay and it works! It even drives the starter!
2. Now, time to connect everything else. Question: my alternator has two of each of the yellow and blue/white wires (four total + the green/white wire) but only one wire of each (blue/white and yellow) coming out of the voltage regulator. When I took the bike apart, one of the blue/white and one of the yellow were tied off and not connected to anything. Should I do that again, or run both yellows and both blue/whites into the one connector coming off the regulator?