red instrumentation bulb cover for sfc1000
- Thread starter redfox
- Start date
sfc vintage
Hero member
Hi Jacques.
I have one for sale.
Price : 14.500 Euro ( and you get a SFC 1000 for free)
Br
Peder.
I have one for sale.
Price : 14.500 Euro ( and you get a SFC 1000 for free)
Br
Peder.
Dingocooke
Senior member
- Location
- England
Is it these??
http://www.cb750faces.com/cb750faces.nl/en/honda-cb750-laverda-gauge-parts/2-honda-cb750-k0-k1-laverda-set-of-four-jewels-lenses.html#
http://www.cb750faces.com/cb750faces.nl/en/honda-cb750-laverda-gauge-parts/2-honda-cb750-k0-k1-laverda-set-of-four-jewels-lenses.html#
Laverdalothar
Hero member
- Location
- Germany
No:
taken from this nice website: http://raresportbikesforsale.com/out-with-an-orange-bang1988-laverda-sfc1000/
taken from this nice website: http://raresportbikesforsale.com/out-with-an-orange-bang1988-laverda-sfc1000/
Dingocooke
Senior member
- Location
- England
Ah sorry I misunderstood! If its red acrylic, you could machine one. I'm guessing it was a part used elsewhere other than Laverda's??
Laverdalothar
Hero member
- Location
- Germany
if they are 12mm one side, this one could help (I know the picture shows a green one, but text states "Rot" which is read...)
http://www.smdv.de/products/81/LED-Symbolleuchte-Quadrat-10mm-Rot.html
http://www.smdv.de/products/81/LED-Symbolleuchte-Quadrat-10mm-Rot.html
Gravelroad
Hero member
- Location
- Central Europe
Jacques, had the same idiot lights many moons ago on my first bike, a Hercules Ultra 50 LC (google for a picture, nice little racer 
). These control lamps are found on many German mopeds of the 70s/80s, e.g. here:
http://www.ebay.de/itm/NEU-ORIGINAL-Zuendapp-Hercules-Kontrolleuchte-6V-ET-P009273402023000-/231334482310
Mostly 6V, but that's not a problem. You can either wire in a 33 Ohm 1.5 Watt Resistor into the cable or, more elegant, push the prongs at the housing carefully inside, and pull out the socket together with the bulb. AFAIK they use standard glass socket bulbs, as found in dashboard lighting of cars, 12V 1.2 W rating.
). These control lamps are found on many German mopeds of the 70s/80s, e.g. here:http://www.ebay.de/itm/NEU-ORIGINAL-Zuendapp-Hercules-Kontrolleuchte-6V-ET-P009273402023000-/231334482310
Mostly 6V, but that's not a problem. You can either wire in a 33 Ohm 1.5 Watt Resistor into the cable or, more elegant, push the prongs at the housing carefully inside, and pull out the socket together with the bulb. AFAIK they use standard glass socket bulbs, as found in dashboard lighting of cars, 12V 1.2 W rating.