Cars and bikes I’ve come across in my travels

I reckon the carbon one will implode as the screen is too flat...😜
If the McLaren is BMW powered both it and the sub run using obsolete Excel.

Mate who does BMW's keeps an old laptop with Excel just for tuning them.
The sub apparently had much the same - an old device using Excel.
 
I was at the Beaulieu autojumble, a massive event, held a couple of weeks ago, on the Lord Beaulie's estate in the New Forest, and this was up for sale. It's a Cord, which was pretty much a pile of rust when the owner found it. He spent 30000 hours rebuilding it from the chassis up to the rather stunning custom, still fit for an Hollywood film star!. There was also this rather interesting beast of a racing car powered by a Curtiss V8 aero engine; a triplex chain drive took power from the propeller mounting, presumably to a direct drive to the rear axle. there was no sign of a gearbox. There was also a rather stunning DS convertible, which I would have thought that it was a coachbuilt version, so extra special!
 

Attachments

  • IMG_20240914_111937.jpg
    IMG_20240914_111937.jpg
    181.9 KB · Views: 40
  • IMG_20240914_140857.jpg
    IMG_20240914_140857.jpg
    217 KB · Views: 41
  • IMG_20240914_140849.jpg
    IMG_20240914_140849.jpg
    204.2 KB · Views: 39
  • IMG_20240914_111425.jpg
    IMG_20240914_111425.jpg
    187 KB · Views: 41
Last edited:
The Curtiss special has the conventional for the period external gear shift on the rhs. I'd suggest there is a chassis mounted gearbox in there.
Again, separate gearboxes were the norm in period. The chain "primary" is possibly a step-up ratio to compensate for the aero engines low rpm.

The Cord looks odd with those wheels and the extreme lowered stance.
 
The strangest Cirds weren’t even Cords: Graham Hollywood street rods. After Cord went bust, Graham made the 81x series cars with a different front clip.
IMG_0175.jpegIMG_0174.jpeg
They were rear wheel drive.
 
Wasn't sure where to post this (maybe The Aussie Depository?!) - for anyone who's ever machined up a chunk of alu. Apparently the frame is also machined out of billet!

Couple of Australian guys developing the ultimate hub centre steering (article in AMCN newsletter).


Motoinno.png
 
Someone at Stafford had brought these rare old high pipe Honda CS72's back from a museum in Japan. You'll probably laugh but I have a real soft spot for these things, anyway that's basically your Laverda 750 engine in those bikes.20241012_131913.jpg20241012_132145.jpg20241012_131942.jpg
 
Approaching this one from the rear, I thought "BMW?"
Black Swan 2024 10 13 01.jpg

Profile was ver-ry long but with the aero-style overhead glass, I'm still thinking "Aviation Company, diversifying. Maybe Armstrong Siddeley, Bristol?"Black Swan 2024 10 13 02.jpg

Suprise!
I did not expect a Riley badge!

Black Swan 2024 10 13 03.JPG

1949, 2.5 Litre.
With quite an interior:
Black Swan 2024 10 13 04.JPGBlack Swan 2024 10 13 05.JPG
 
Last edited:
One of the last gatherings before the winter rains kick in. This at the Fort Langley Fort parking lot.
 

Attachments

  • IMG_8187.jpeg
    IMG_8187.jpeg
    224 KB · Views: 23
  • IMG_8186.jpeg
    IMG_8186.jpeg
    232.5 KB · Views: 20
  • IMG_8185.jpeg
    IMG_8185.jpeg
    239.1 KB · Views: 20
  • IMG_8184.jpeg
    IMG_8184.jpeg
    262.6 KB · Views: 20
  • IMG_8183.jpeg
    IMG_8183.jpeg
    268 KB · Views: 24
  • IMG_8182.jpeg
    IMG_8182.jpeg
    257.8 KB · Views: 24
  • IMG_8181.jpeg
    IMG_8181.jpeg
    278.9 KB · Views: 25
  • IMG_8180.jpeg
    IMG_8180.jpeg
    216.8 KB · Views: 23
Back
Top