Ignition timing Laverda Chott 2T

Bring the piston to T.D.C. (Top Dead Centre). The marks on the crankcase and on the generator flywheel must align

View attachment 109181
You sure that's for ignition timing??? Sounds a lot like how to find TDC to me, because neither the crankcase or the generator flywheel are adjustable. 1970s Yamaha 20stroke songle trail bikes specced something like 3.4mm BTDC (360) and less for smaller capacities.

As Nils mentioned there will be a mm or degree figure he's after.
 
You sure that's for ignition timing???
Nope not 100% but reading the manual it seems logic to me it is.
Coming from the Chott manual , it says : Bring the piston to T.D.C. , not : how to find TDC.
Set the groundplate with both markers correct , and then the bring the piston to T.D.C and place the flywheel with markers correct.
That is how i think it should be done.

Schermafbeelding 2026-11-15 095904.png
 
The base plate has a marking that should correspond to a marking on the engine case and may be used as a baseline upon assembly. As the flywheel is keyed to the crank, there is no further adjustment possible. Imho, the flywheel marking is solely for strobing/checking the ignition timing.

I'm with Quentin, somewhere around 3mm BTDC sounds about right for a 250 2-stroke single. I've only ever used the flywheel marking for strobing, my Chott runs very nicely with no signs of lag or over-heating.

piet
 
Thanks.
The new system from Vape does not inklud a keyed flyweel and I therfor have to make new marking fore tds and ignition and I just like to get confirmations abbout advanced timing ..........
 
I am a big fan of drawing a circle on a piece of paper the diameter of the flywheel, and marking TDC on it, using a piston stop to check that mark is correct and using a protractor to mark an angle for the degrees before TDC in the correct direction of engine rotation; you need to know what that angle is. Finding where that angle intersects with the circumference on the flywheel,measure that distance and either check your original mark or make a new mark and that's where you strobe to. Check that you still have an effective Woodruff key before you hurt your foot. Guess how I learned that lesson. It's miraculous to kick a properly timed bike and get a great starting bike.
 
Back
Top