3cl rear indicator stalk

C

Cornishjota

New member
Location
Cornwall
Hello there

I need a rear indicator mount for a 3c/3cl - as far as I can tell it's one piece consisting of two tubes and a flat bracket that attaches on the rear of the numberplate housing, with the tubes being black as opposed to chrome.

Piet has been kindly helping me with some other bits, but is unable to source this part, so I thought I'd reach out and see it anyone has an old one that needs a new home!

Thanks for reading.

Colin.
 
They are rare and silly expensive, I think Laverda Paradies does them. Don't mount them to the sides of the rear light bracket unless you reinforce it, it will crack almost immediately.
 
Colin is looking for the tube with M10 threads at each end to take the CEV-type indicators, it is profiled in the centre portion to fit to the rear of the numberplate/tail light carrier. Fitted to 3CL without grabrail and 500, part #21 119 270.

piet
 
If it's anything like the Ducati one, they have this Government reg about spacing blinkers way out in the breeze. So easy to damage in a tip-over or being kicked by your boot getting on the bike. I cut mine down to be closer to the bike side, which reduces the ugly and makes them safer from damage, still pretty easy to see them.
 
Looked for 30 Minutes in garage A, then 15 minutes in garage B, then went back to garage A and found them in the box with the turn signals. What kind of genius put them there? First time I ever removed one from the wrapper and comparing it with the picture from Andy's site they are different at the end- I guess they are for the CEV-clamp type indicators you see in the box. I must have given some away over the years because I remember it was two hands full.

1693594979135.png
 
You must log in or register to reply here.
Back
Top