a14rgs
Hero member
- Location
- Wiltshire, UK
I'm currently breaking a 1979 500 - it's definitely a 'for spares only' bike (or what's left of it) 
The motor, brake rotors, calipers and chainguard are already spoken for, but I have other parts available.
First off, here are the forks and yokes, which I'd prefer to sell complete, as seen here. They are 35mm Marzocchi.
The legs obviously need rechroming, but the sliders, yokes etc are complete and undamaged with all lugs, threads etc clean and intact.
I'm asking a very reasonable GBP£200 [reduced from £220 - 18/10/24] plus worldwide shipping at cost.





I also have a pair of original FLAM wheels, which are unique to the 500s. They're both WM3 2.15x18. No visible dings, lever marks, cracks or flat spots, but they do have surface corrosion so ideal for blasting and painting or powder coating. I've left the bearings in situ to keep the bearing spacers in place, but would strongly encourage you to fit new bearings.
GBP£200 [reduced from £250 - 18/10/24] plus worldwide shipping at cost.



I also have an undamaged and complete (but scruffy) frame, swinging arm, sidestand, battery tray, headlamp bowl, wheel spindles and adjusters, plus other small parts.
Please send me a message if you're interested in these or any other parts. I'm in Wiltshire, England.
The motor, brake rotors, calipers and chainguard are already spoken for, but I have other parts available.
First off, here are the forks and yokes, which I'd prefer to sell complete, as seen here. They are 35mm Marzocchi.
The legs obviously need rechroming, but the sliders, yokes etc are complete and undamaged with all lugs, threads etc clean and intact.
I'm asking a very reasonable GBP£200 [reduced from £220 - 18/10/24] plus worldwide shipping at cost.





I also have a pair of original FLAM wheels, which are unique to the 500s. They're both WM3 2.15x18. No visible dings, lever marks, cracks or flat spots, but they do have surface corrosion so ideal for blasting and painting or powder coating. I've left the bearings in situ to keep the bearing spacers in place, but would strongly encourage you to fit new bearings.
GBP£200 [reduced from £250 - 18/10/24] plus worldwide shipping at cost.



I also have an undamaged and complete (but scruffy) frame, swinging arm, sidestand, battery tray, headlamp bowl, wheel spindles and adjusters, plus other small parts.
Please send me a message if you're interested in these or any other parts. I'm in Wiltshire, England.
Last edited: