750 gearbox bushing

S

sergio750sf

New member
Location
France
Hi every body

I put new gearbox bushes (750 sf)
I have to machine  them so  I should like to know the "good" radial play.
I think about 0,02 mm, am I wrong ?

Kind regards
 
All the clearances for he gear boxs are in the back of the owners hand book PM me if you don't have access to a copy and I'll scan one

Jugs
 
Factory specs are 0.01 to 0.049 mm clearance on the main shaft gear bushings, and 0.021 to 0.044mm for the bushings sitting inside the sprocket shaft gear. 0.025 to 0.040mm for the bushing of first gear wheel on layshaft. That's for an early triple. Don't think the twin gearboxes have any different clearance requirements for the bushings.
 
You must log in or register to reply here.
Back
Top