81 jota left bar switch

B

brooky

Junior member
Location
PETERBOROUGH
does anyone have a wire diagram for a 81 jota that shows 11 wires /9 in the wire block connector plus 2 with bullet connectors on all the diagrams i look at dont show 11 poss 120ts ? any input appreciated . thanks all
 
brooky said:
does anyone have a wire diagram for a 81 jota that shows 11 wires /9 in the wire block connector plus 2 with bullet connectors on all the diagrams i look at dont show 11 poss 120ts ? any input appreciated . thanks all
Click to expand...
Are you sure the switch is from a Laverda?
The Suzuki GT Series ones are the same switch but with different connections.
 
Hi all , i am unable to say for certain that the switch is oe laverda but the connections are the same type as my monty .the fault i am looking into is that on low beam i get the high beam indicator in the clock come on . it works as should main beam .
 
Wiring diagrams available in the Library on here, but seems to me if the switch is activating high beam correctly then wire to Hi beam light is connected to wrong terminal at the bulb holder. (but no doubt I am wrong and nothing is ever that simple........)
 
Hi all . after lots of head and arse scratching and a fair bit of general swearing i got to the bottom of my fault!!!! beware led headlamp bulbs, replaced the bulb with a std halogen and the problem fixed, so it seams that the led feeds high and low at the same time backfeeding to the high beam lamp.
 
The problem may well have been with that particular bulb. LEDs, in themselves, are not the problem.
I, along with many others, have had LEDs in our headlights for a number of years, without experiencing the problems you describe.
I use the Auxito H4 replacement lam.
 
You must log in or register to reply here.
Back
Top