Not much info on this.Why I asked is I was looking at a lack of off idle power on my Pantah.I checked its timing with a strobe and it looked like it wasn't going to full advance.A bloke on the Pantaheads list offer to have a look.He found it would go to its first advance at 1700rpm but nothing after that,OR SO WE THOUGHT.We then went into the air gap rabbit hole attempting to get it to go to its SUPPOSED full advance at 2800rpm.Acording to the list where it should happen.We tried a bigger gap,no result and then a smaller gap and that changed it a bit.Pain in the arse job,draining the oil and you need brass feeler gauges because of the magnet.I then asked one of the blokes at the local Ducati shop and he tells me the Pantah boxs have a 3 step advance and full advance happens at 4000rpms.
So first jump is 1700rpms,2nd is 2800rpms and full is 4000rpms.We were just not reving it enough to show the full advance.Wasted 2 days doing this stuff.BTW I found a reference to Bevels having this 3 step advance as well.Maybe why there Bosch systems work a bit better.
We had a discussion about 2 or 3 step advances and for some odd reason no one else had a 3 step advance,most were not in OZ.I have no idea why the rest of the world got 2 step advances and according to the local pro,he said all Pantahs had 3 step advances.Mine is a TL so maybe that got 3 step?