Brembo calliper spares

[Schurminater]

Morning all,

Can someone please guide me to the correct rear brake calliper seals and pistons (Brembo) for a 1980 Jota,I have an occasional sticky rear calliper and though i have managed to get it working again with a thorough clean and workout,there is some evidence of corrosion on one of the pistons.

Have seen P08 and P05 mentioned?

Thanks guys

Steve

 

[a14rgs]

Hi Steve,

Assuming OE callipers, they're commonly referred to as P08s. Here's a link to the seal kit - Teflon pistons are available too (and recommended replacements for steel items) -  https://www.laverda-paradies.de/article-56-61-en.html
All available from the usual suppliers

Alan

 

[Schurminater]

Hello Alan,

Many thanks for that information much appreciated,the corrosion marks definitely indicate steel items which are most likely due for replacement.

thanks again 

Steve

 

[Dellortoman]

They're actually F08, not P08. To be precise the designation is P2-F08. The P2 part presumably meaning 2 pistons because the ones with 4 pistons are designated P4.

 

[Schurminater]

They're actually F08, not P08. To be precise the designation is P2-F08. The P2 part presumably meaning 2 pistons because the ones with 4 pistons are designated P4.

Thanks for the information  (bigthumb)

 

[laverdas]

Hi, Ducatic paddy as all you need to refurb

regards andy