Brembo P08 calipers - Ceriani fitment

[sfcpiet]

I'd definitely use some form of thread locking there, Ally.

Nylocs would be easiest/cheapest, lock nuts with metal inserts last longer.  Spring washers chew up the alloy and lock-wiring is a bit difficult behind the fork leg... a drop of Loctite will also do the trick.

piet

 

[bob]

I never ever had to replace one single helicoil anywhere on my bikes.

I've never had to install a single helicoil anywhere on my bikes 

I think Marnix converted his bike to a full Helicoil makeover shortly after he invested in that long handled 1/2" drive socket set 

 

[MarnixSFC]

Hey Bob,

I've been torquing nuts and bolts for over two decades and am very familiar with the torque properties of all materials.



Eeehm wait, make that 4 decades!

Messed up a whole lot of things during the first two decades though..  :'(

Marnix

 

[CLEMTOG]

Alan, do you want to make a visit and use my pillar drill and timecert kit?
10mm in stock, long and short.
need to avoid next week (funeral)
CLEM

 

[sfcpiet]

Messed up a whole lot of things during the first two decades though..   :'(

Think most of us did....

piet

 

[a14rgs]

Alan, do you want to make a visit and use my pillar drill and timecert kit?
10mm in stock, long and short.
need to avoid next week (funeral)
CLEM

Clem,

As always, that's a very kind offer, thank you.

Your current focus is fully understood and acknowledged - my email also refers.

Kind regards,
Alan