Chott exhaust protector , what material ?

Eef7260

New member
Like the title says , does anyone have a clue what material the originals where made from ?
Material seems real stiff and strong , but it must be heat resistant to a certain amount .
Seems like polyester with matts in it but is that possible with an exhaust so close by ?.
Was done in 1975 so material choice was less then now.
But also some materials where less of problem then , like asbestos.
Would be nice to produce one that works and survive the heat.
But what material (would a 3D print be possible ? )
Also thinking about finishing the inside with heat deflector foil.
Any input is welcome.



View attachment Chott.mp4
 
Mine looks like simple fibreglass, no signs of burning or over-heating anywhere. Don't see any need to re-invent the wheel... ;)

In my experience, 2-stroke headers don't get anywhere near as hot as 4-strokes, always a fair bit of un-burnt, cooling gas going out the exhaust. 2-stroke exhaust gas temps rarely exceed 700°C, 4-strokes can go over 1000° easy.

piet
 
I once tried to quiet down the single-skinned expansion chamber of a 2-stroke Husqvarna so when riding it on the street by wrapping it in heat-proof exhaust tape and coating it with epoxy fibreglass; it worked as a ding protector as well. It lasted about a year till I got sick of the horrible smell the heat made. It didnt remove the extremely loud Ding Ding sound either. You need a dual-skin chamber to quiet them. You can buy generic Alloy lobster tail-looking armoured protectors anyway.
 
Back
Top