Engine oil seals

D

David_Jones

New member
Location
UK
Hello,
I have a Laverda Jota 1979 and need a set of engine oil seals:

Gear box shafts x2
Clutch push rod x1
Alternator x1
valve guides x3

does anyone have a recommended supplier here in the UK?

Regards, David
 
David_Jones said:
Hello,
I have a Laverda Jota 1979 and need a set of engine oil seals:

Gear box shafts x2
Clutch push rod x1
Alternator x1
valve guides x3

does anyone have a recommended supplier here in the UK?

Regards, David
Click to expand...
If you have a reputable bearing supplier in your area then you will probably find they'll supply oil seals as well. If seals are already removed just take them in to be matched. You could just send seal dimensions + photos of the letters & numbers that are usually printed on the seal's outer face.
Try this company https://www.elringparts.co.uk/About/About-Us
The do valve stem oil seals as well. https://www.elringparts.co.uk/ElringParts/media/PDFs/Valve-Stem-Seals.pdf
You may as well replace all them while you're at it. Bit of a false economy to just do x3 !!
 
Last edited:
jotajoe

Thread 'Oil seals series 1'

I've consulted the Green Book and this is the list as far as I can make out. If there are anymore could some kind knowledgeable soul let me know. Then I can order them all together.

Starter freewheel seal 35 x 47 x 7
Gearbox mainshaft      45 x 60 x 7
Sprocket end oil seal    ?  Nothing given in green book
Clutchrod oil seal  (sprocket end )      6 x 19 x 7
Layshaft oil seal        17 x 40 x 7

I have a full gasket set...:)

Cheers

joe
 
You must log in or register to reply here.
Back
Top