stevepm2011
Hero member
- Location
- Cologne, Germany
I noticed that the SFC's fuel taps were weeping a bit, so decided to replace them with the new set I bought for the Jota.
This fixed the issue, so I stripped the old ones to see if they can be repaired.
Both are the 90 degree type, with flat rubber gaskets inside. The seal is provided by the rotating metal plate pressing on the rubber. The pressure on the plate is provided by a wavy steel washer clamped under the screwed- on cover plate ( the one with ON / RES / OFF on it) Everything looked OK, I couldn't really see why they had been leaking, except if wear meant the contact between metal and rubber was no longer firm enough to make a seal.
Maybe if I skim the top of the housing, this will put a bit more compression on the rubber and stp the leak.
Anyone tried this before?
Steve
This fixed the issue, so I stripped the old ones to see if they can be repaired.
Both are the 90 degree type, with flat rubber gaskets inside. The seal is provided by the rotating metal plate pressing on the rubber. The pressure on the plate is provided by a wavy steel washer clamped under the screwed- on cover plate ( the one with ON / RES / OFF on it) Everything looked OK, I couldn't really see why they had been leaking, except if wear meant the contact between metal and rubber was no longer firm enough to make a seal.
Maybe if I skim the top of the housing, this will put a bit more compression on the rubber and stp the leak.
Anyone tried this before?
Steve