Headlight arm rubbers

[neandethal]

Hi, i have managed to buy, NOS montjuic headlamp arms but they came without the rubbers for top and bottom, would 3mm thick o-rings of correct diameter work? Or does anyone have correct parts for sale?
Cheers Ian

 

[Mtoliva]

I’m interested in the same parts for my 3c, any tips appreciated

 

[78jotadave]

I’m interested in the same parts for my 3c, any tips appreciated

Would fork seals fill the void?

 

[neandethal]

Possibly but would need to be pretty thin

 

[rez]

Product Details

Laverda Racing Team Konstanz - das Laverda-Paradies

www.laverda-paradies.de

Regards
Rainer

 

[pf1]

I’m interested in the same parts for my 3c, any tips appreciated

Motalia, you need the aluminium ring and the rubber ring.

 

[sfcpiet]

Motalia, you need the aluminium ring and the rubber ring.

500s have a different set up to the triples. Chrome steel cups are pressed into the tube top and bottom, a stepped rubber ring takes up the void.

I should have 3D printed TPU repros.

piet

 

[pf1]

Mtoliva was asking about 3C rubbers Piet, I should have been more clear about it.

 

[Mtoliva]

Thanks for the comments, next question, how complicated is it to replace my existing worn ones, my brackets rattle when riding, annoying but not life threatening, so not worth a heap of work pulling the front forks off?

 

[sfcpiet]

Mtoliva was asking about 3C rubbers Piet, I should have been more clear about it.

OP Neandethal was asking about Montjuich parts...

piet

 

[The Sock]

Thanks for the comments, next question, how complicated is it to replace my existing worn ones, my brackets rattle when riding, annoying but not life threatening, so not worth a heap of work pulling the front forks off?

Pull a loop of string into the gap, at the top, Martin. That'll work as a temporary fix, until you pull the top yoke off.

 

[Tree Hugger]

The MZ Shed on eBay do 32mm and 35 mm rubber stepped rings. I fitted 35 to my 750 and they are fine. Not 38mm tho but.