How many teeth on a 650 Zane starter motor

N

Nick

Full member
Just fitted a Zane sprag and idler gear to the Atlas but it all feels a bit tight and makes a 'whizz' noise on starting.

I'm wondering if the Zane starter motor has a different number of teeth to the Atlas.

All a bit odd because this arrangement was okay on Atlas #1

Thanks

Nick :-)
 
The couple I have have 13 teeth.

They are different starter motors. One is a Denso with 3 mounting screws into the end of the starter.
The second is an Italian SJCE with a flange and 2 mounting bolts to the outside like most cars. Maybe it is not a Zane starter. Will have to investigate...

Regards

Greg
 
From Piet's reply am I right to think the Atlas has the same starter as the 650/668? If so this is with the slight difference in the location of the power input wire the same as an RGS?

Nick :-)
 
Nick said:
From Piet's reply am I right to think the Atlas has the same starter as the 650/668? If so this is with the slight difference in the location of the power input wire the same as an RGS?

Nick :-)
Click to expand...

Yes.  Same starter, only different gear.

piet
 
You must log in or register to reply here.
Back
Top