Koni;s

[Rufustbear]

After the Koni;s came apart at Spa,all seals appear good can any one tell me what weight oil and what amount (volume) of oil is needed,save me hours of shearching on the net,cheers Ray.

 

[Melle]

Ray, I used 100ml 10W oil (same oil as the front forks)

Regards, Melle

 

[CLEMTOG]

use two pound of that tar that you scraped out of your crankcases, or was it left over from a flat rufus
CLEM

 

[nick7]

Ray, just junk 'em and buy some Wilburs...Rocket Rob can't be wrong? Nor Deadslow Davies...
Nick7

 

[Reggie3cl]

Send 'em off to Falcon to be fixed.

 

[CLEMTOG]

do what Kendall did in 1971 and put to lumps of 20mm box with eyes welded on instead, no leaks, no chain tension variation and no wear, also saves greasing the swingarm
CLEM

 

[Rufustbear]

Thanks Melle for the only constructive contribution ,for a while i thought i was in  This weeks jokes section !

 

[Melle]

Hello Ray,

sounded like a real and honest question to me, so you get a real and honest answer! When I took mine apart, Little over 90 ml came out, they had been leaking, when ordering seals etc I asked how much I should put in. That is how know. Did an artikel about it in the Dutch club magazine.

Regards, Melle