Laverda Chott and TR spare parts

L

Luigi

Full member
Location
Germany
Hi all,20231006_133009.jpg20231006_132815.jpg20231006_131738.jpg20231006_131302.jpg20230616_093019.jpg20230616_092341.jpg
a friend of mine and I own some Chott and TR.
The most of them need plenty of work :sneaky:and of course spare parts are needed. Though I go to Breganze several times a year I couldn´t find a good source for parts.
So we decided to look for reproductions. To realize affordable prices we had to order minimum 10 up to 50 pieces per part o_O
The parts which we don´t need are for sale:

Pistons for both types. They have a little more weight than the original. The diameter is 68,5mm.
Of course complete with rings and pin and pin locks for € 165.- each.

Gasket set € 73.- Who don´t needs a set can order all gaskets single.

Clutch plates one set/four pieces € 108.-

Rubber holder for the speedo and rev counter € 78.- a pair/two pieces (without instruments and support ;))

All prices are plus shipping costs

If there are any questions please let me know it.
Thank you
Luigi
 
Luigi said:
Dag Allemaal,View attachment 85880View attachment 85881View attachment 85882View attachment 85883View attachment 85884View attachment 85885
een vriend van mij en ik hebben Chott en TR.
De meeste hebben veel werk nodig :stiekem:en uiteraard zijn er reserveonderdelen nodig. Hoewel ik meerdere keren per jaar naar Breganze ga, kon ik geen goede bron voor onderdelen vinden.
Daarom besloten we op zoek te gaan naar reproducties. Om betaalbare prijzen te realiseren moesten we minimaal 10 tot maximaal 50 stuks per onderdeel bestelleno_O
De onderdelen die wij niet nodig hebben zijn te koop:

Zuigers voor beide typen. Ze hebben iets meer gewicht dan het origineel. De diameter bedraagt 68,5 mm.
Uiteraard compleet met ringen en pin- en pinsloten voor € 165,- per stuk.

Pakkingset € 73,- Wie geen set nodig heeft, kan alle pakkingen per stuk bestellen.

Koppelingsplaten één set/vier stuks € 108,-

Rubber houder voor de snelheidsmeter en toerenteller € 78,- per paar/twee stuks (zonder instrumenten en steun ;))

Alle prijzen zijn exclusief verzendkosten

Als er vragen zijn, laat het me dan weten.
Bedankt
Luigi
Click to expand...
Hallo Luigi,
Graag meer informatie om de onderdelen te verkrijgen.
Ik ben geïnteresseerd in zuiger 2T, zuiger 2TR, koppelingsset, twee pakkingsets.
Frank van Gerven
Holland
 
Hallo Frank,
gut von dir zu hören.
Wir kennen uns von der oldtimerbeurs in Budel voriges Jahr. Du hast von mir die Aufkleber für die Formula 500 bekommen. Einen Aufkleber bekommst du ja noch ;)
Da ich in Deutschland wohne, ist es kein Problem, die koppelingsset zu schicken.
Ich brauche noch eine Adresse von dir. PM oder mit email: laverdino64@gmail.com

Groetjes
Wilfried

Hello Frank,
good to hear from you.
We know us from the oldtimerbeurs last year in Budel. You got the stickers for the Formula 5oo of me. You still get one ;)
As I live in Germany its easy to send the koppelingsset to you.
I still need an adress of you. PM or email me: laverdino64@gmail.com

Best regards
Wilfried
 
Luigi said:
Hi all,View attachment 85880View attachment 85881View attachment 85882View attachment 85883View attachment 85884View attachment 85885
a friend of mine and I own some Chott and TR.
The most of them need plenty of work :sneaky:and of course spare parts are needed. Though I go to Breganze several times a year I couldn´t find a good source for parts.
So we decided to look for reproductions. To realize affordable prices we had to order minimum 10 up to 50 pieces per part o_O
The parts which we don´t need are for sale:

Pistons for both types. They have a little more weight than the original. The diameter is 68,5mm.
Of course complete with rings and pin and pin locks for € 165.- each.

Gasket set € 73.- Who don´t needs a set can order all gaskets single.

Clutch plates one set/four pieces € 108.-

Rubber holder for the speedo and rev counter € 78.- a pair/two pieces (without instruments and support ;))

All prices are plus shipping costs

If there are any questions please let me know it.
Thank you
Luigi
Click to expand...
Hello.
I trust you are keeping well.
Looking for help with spare parts for my Laverda 2TR, do you have engine gasket sets available, cylinder head gasket is my highest priority, can you advise on shipping costs to the UK.
Looking forward to your reply.
Best Regards
Mike.
 
Hi Mike,
thank you, I´m fine.
Good news: some gasket sets are left.
The price is 73 €, the shipping costs are 11,49 € (tracked and insured)
In all 84,49 € what is around 72,42 Pound Sterling. You can transfer the money in Pound Sterling, so you don´t have extra costs for money exchange.
Best regards
Wilfried
 
Luigi said:
Hi Mike,
thank you, I´m fine.
Good news: some gasket sets are left.
The price is 73 €, the shipping costs are 11,49 € (tracked and insured)
In all 84,49 € what is around 72,42 Pound Sterling. You can transfer the money in Pound Sterling, so you don´t have extra costs for money exchange.
Best regards
Wilfried
Click to expand...
Hi both, I am looking to buy two clock surrounds. Would it be possible/ cheaper to combine the postage to one address. Obviously cash to be sorted before the transaction
 
terry sage said:
Hi both, I am looking to buy two clock surrounds. Would it be possible/ cheaper to combine the postage to one address. Obviously cash to be sorted before the transaction
Click to expand...
Hi Terry,
for me it's fine to send all in one parcel. The clock surrounds are available.
Mike should send me his ok for that. I only need to use a larger parcel which costs a bit more what you should pay.
If Mike agrees I check the costs and give you a message.

Cheers
Luigi
 
Hi Luigi, please proceed with the additional packaging and confirm the costs, hopefully this will not delay the postage to much as we are in the Easter celebrations.
BR
Mike.
 
Hi Luigi, please proceed with the additional packaging and confirm the costs, hopefully this will not delay the postage to much as we are in the Easter celebrations
BR
Mike.
 
Cassino said:
Hi Luigi, please proceed with the additional packaging and confirm the costs, hopefully this will not delay the postage to much as we are in the Easter celebrations.
BR
Mike.
Click to expand...
Hard to believe but we are in Easter Celebrations as well 😉😂
I will split the costs of delivery and let you know asap. But at the moment I'm a bit occupied with Easter too.
Cheers Luigi
 
terry sage said:
Sorry Mike I didn't read the post properly, yes I was thinking we could split the postage cost if you want to
Click to expand...
Hi Terry,
I will split the costs of delivery and let you know the result ASAP. But at the moment I'm a bit occupied with Easter 😉 Sorry
Cheers Wilfried
 
terry sage said:
Thanks both, I'll wait to hear from you
Click to expand...
Hi both,

the costs of delivery for all parts is 17,99€. So everyone has to pay 9,00€
Mike already paid 11,49€. So Terry needs to pay to Mike 2,49€ and the difference of 6,50€ (17,99-11,49=6,50) to me and the price for the clock surrounds of 78,00€.
Terry, in all please pay 84,50€ to me what is around 70,40 Pound Sterling. You can pay in Pound Sterling without paying an exchange fee.

Please check my calculation and let me know if its ok or not.

Cheers
Wilfried
 
Luigi said:
Hi both,

the costs of delivery for all parts is 17,99€. So everyone has to pay 9,00€
Mike already paid 11,49€. So Terry needs to pay to Mike 2,49€ and the difference of 6,50€ (17,99-11,49=6,50) to me and the price for the clock surrounds of 78,00€.
Terry, in all please pay 84,50€ to me what is around 70,40 Pound Sterling. You can pay in Pound Sterling without paying an exchange fee.

Please check my calculation and let me know if its ok or not.

Cheers
Wilfried
Click to expand...
Can you let me know an account to pay into please for both. So i want two clock surrounds,£140.80 to you Wilfried. And then say £10 pounds to Mike forpostage, is that right? I'm happy to go ahead
 
You must log in or register to reply here.
Back
Top