Laverda library on iloc - RGS/3 Diamensions of its frame and Brembo brakes

  • Thread starter Thread starter jc
  • Start date Start date
J

jc

Junior member
The laverda library on iloc.co.uk now has two documents which will enable you to build your own RGS/3 frame and Brembo braking system from scratch :D.

1.  RGS/3 Frame diamensions - 2 pages showing the diamensions of the frame

2.  RGS/3 Brembo info and diamensions - 18 pages of technical drawings with enough information to create your own Brembo braking system (a very well equipped workshop would be required though).

Now why someone would want to do this is beyond me but seriously if your RGS is diamensionally challenged then this may be of use to someone. Or you even want to start your own production line for RGS frames and brakes - if this is the case then I think you have enough information to get going with this little project!!

Julian

ps

Would be interested if this is of use to anyone!!.

Documents are from Moto Laverda 24 Mar 1988 and are in Italian
 
anyone know what the differences are between RGS, RGS/1 (as used for the SFC), RGS/2 (which Scrumpy once had) and RGS/3?? Is it stearing-head-angle, is it different markets just or additional strengthening plates somewhere?

I know that the SFC 1000 Classic had some plates welded to the downtubes to avoid them cracking, but these frames still were listed as /1 frames (as were the first series of SFC frames and all RGS after 1985 as far as I can tell). Anyone?!?

 
Don't know, but would surely like to know too.
Maybe an update needed for homologation purpose only?

Cheers,
Jacques.
 
You must log in or register to reply here.
Back
Top