LED turn indicators on SF1

[Henk Kuipers]

Installed cheap and very brigth mini LED turn indicators from Aliexpress to replace the big (broken) indicators I had. Took a while to figure out how to get them working, the solution turned out te be simple. After replacing the lights I needed to also replace the relay and found this tiny Kellermand R1 relay to be perfect: https://www.louis.nl/artikel/keller...481829769d5973&filter_article_number=10032274. Indicators work, blink at correct speed and the dash control light works. Simply connect the three wires (plus to red, signal to green and dash control to yellow). Three pictures, old indicators before replacement, the almost invisible tiny LED indicators and the connected Kellerman R1 mini-relay.

 

[Henk Kuipers]

Link to the LED indicators: https://www.aliexpress.com/item/4000570615947.html?spm=a2g0s.9042311.0.0.31004c4d5gnUuC

 

[Dellortoman]

That's a neat little relay.

 

[piranha-bro2]

Been rewired with all the wires stuffed into the non-SF1 headlight shell? Is that tiny black thing the relay? Very tidy!

 

[Henk Kuipers]

Been rewired with all the wires stuffed into the non-SF1 headlight shell? Is that tiny black thing the relay? Very tidy!

Yes it saves some precious space, the new relay is so much smaller than the old one I was using