Mounting the [SF] Bosch Regulator - Vibe Free
- Thread starter Haggis
- Start date
Simonr501
Hero member
- Location
- Lympne, Kent. UK
That looks like a bit of conveyor belt Marnix (probably is too).
Dellortoman
Hero member
- Location
- Tasmania, Australia
One of the Laverda factory workers probably sliced a bit off the edge of the belt that the parts were going past on. 
If you make your own mounting from a piece of mud-flap or whatever, start the bike and rev it through the normal riding rev range while watching the VR for vibes. The purpose being to make sure your mounting doesn't have a natural frequency somewhere in that range, otherwise you might actually be making things worse for the VR. It's very hard to predict where vibrations will show up, so always worth checking.
If you make your own mounting from a piece of mud-flap or whatever, start the bike and rev it through the normal riding rev range while watching the VR for vibes. The purpose being to make sure your mounting doesn't have a natural frequency somewhere in that range, otherwise you might actually be making things worse for the VR. It's very hard to predict where vibrations will show up, so always worth checking.