New member but!!!

P

Pierre

New member
Location
Québec
Hello.
I am a New member but i own a 3c since 1979( 42 years ago)
Bought iT for my 24th birthday( now 65)
Just took iT out from storage( controlled) after 36 years.
 

Attachments

  • _20210606_140540-1.JPG
    _20210606_140540-1.JPG
    158.7 KB · Views: 94
  • _20210606_140515.JPG
    _20210606_140515.JPG
    133.8 KB · Views: 94
Those reflectors on the ends of the oil coolers are a new one for me. You have owned yours 9 years longer than me. Looks fab, I love mine too.
 
piranha-bro2 said:
A credit to the quality of your storage that it still looks so tidy - I'm guessing you had the red livery redone - stunning paintwork! Ride on!
Click to expand...
Stock but compounded
All stock but DMC Witt and easy Clutch
Also have the stock seat but the storage of the 750 seat is welcome since the tool
Tray bécame the spot for the Witt, rectifier and flasher relay
 
Hello Pierre,
What a nice bike you have! Do you still have the original headlamp brackets? they would look good on your time capsule.

Gerald
 
Pierre, stunning bike you have there, hope you get time to ride it!

One thing that sprang to my eyes: the center stand needs fixing... the tires are not lifting off the ground and the angle the stand is in doesn't look very safe. Either the mounting holes are knocked out and need fixing or the stop screws are gone or to much put in...
 
+1 on Lothar's point about the stand although, on a Ceriani forked bike, there shouldn't be stop screws.
I've seen where a replacement Marzocchi forked bike stand has been fitted, incorrectly, with the stops removed.

Is it hell to pull on to the centre-stand, Pierre?
It shouldn't be. I put mine easily on the stand while still astride the bike.
 
The Sock said:
+1 on Lothar's point about the stand although, on a Ceriani forked bike, there shouldn't be stop screws.
I've seen where a replacement Marzocchi forked bike stand has been fitted, incorrectly, with the stops removed.

Is it hell to pull on to the centre-stand, Pierre?
It shouldn't be. I put mine easily on the stand while still astride the bike.
Click to expand...
Thanks i Will check because yes,IT is a pain
 
The Sock said:
+1 on Lothar's point about the stand although, on a Ceriani forked bike, there shouldn't be stop screws.
I've seen where a replacement Marzocchi forked bike stand has been fitted, incorrectly, with the stops removed.

Is it hell to pull on to the centre-stand, Pierre?
It shouldn't be. I put mine easily on the stand while still astride the bike.
Click to expand...
The silver Jotas with Ceriani forks had the stop screws. The brand spanking new bike on my 70's Athena poster shows them clearly.
 
You must log in or register to reply here.
Back
Top