Out and About on your Laverda.No bull,Just photos

Fabulous transformation.
'Drooping of the undercarriage appendages' fixed - a job I need myself.... :)
Here's the poshed up Kangaroo that Maurice bought from me.
It was pretty good under all the grunge, tank was full of water, carbs were horrible, valves and pistons were gummed up with gunge and the sump was full of petrol. The clutch was glued together but generally it was all ok. It ran like a champ too.
apr 15 002.jpg
 
I have the mould for the TS fairing should you want one from it, carbon fibre re-inforced or 100% if you like, I also have a used fairing and several sets of bracketry.
CLEM
 
I have the mould for the TS fairing should you want one from it, carbon fibre re-inforced or 100% if you like, I also have a used fairing and several sets of bracketry.
CLEM
It has a fairing now Clem, the Flying Kangaroo is now the brown bike owned by N Giles looking oh so sophisticated in the pictures above.
 
It's a strange man who wears fourth gear out o_O
2nd. and 4th. gear mainshaft bushes are nearly ALWAYS very worn. 3rd. on the layshaft much the same, 5th. main to a lesser degree, mostly.

Some gearboxes display horrific amounts of play in the gear bushes, next to many mal-adjusted gears and shafts. Seen lots of broken gears too, possibly resulting from excessive clearance. Finding a Laverda gearbox that is not in need of some TLC is a very rare occurance.

piet
 
Back
Top