Hey Vince,
OK, the current setup forthe front forkis:
- 2 1/2 turns on the gold valve, blue spring
- 130 mm air gap on totally compressed fork leg
- oil viscosity is 15w
- 20 mm spring preload
Apart from that I am on Bridgestone T30 Evo's on 2.5 bars at the front and 2.8 at the rear. That's all i can think off.
I am reasonably happy with the handling, but might reducepreloada little more next spring.
Thanks so much for the good advice I got here in the forum!!
Totally agree with the others here on the steering stop plate design. BTW, I'll check out the spacer discs mentioned in order to increase the spacing between yoke and stop plate.
Cheers,
Alex
OK, the current setup forthe front forkis:
- 2 1/2 turns on the gold valve, blue spring
- 130 mm air gap on totally compressed fork leg
- oil viscosity is 15w
- 20 mm spring preload
Apart from that I am on Bridgestone T30 Evo's on 2.5 bars at the front and 2.8 at the rear. That's all i can think off.
I am reasonably happy with the handling, but might reducepreloada little more next spring.
Thanks so much for the good advice I got here in the forum!!
Totally agree with the others here on the steering stop plate design. BTW, I'll check out the spacer discs mentioned in order to increase the spacing between yoke and stop plate.
Cheers,
Alex