Re: What did you do to or for or with your Laverda today?

[tyelav13]

Same again today, aren't you supposed to have more time to yourself  as you get older?

 

[Grant]

Looks cool.
Only comment I would offer is to extend the tailpiece to cover the frame tubes sticking out the back.
Or is it just the angle the pic was taken from?

 

[VanguardontheLav]

I went to work on mine (recently cleaned and polished ready for the MOT...)

Of course, It's pissing with rain now I'm ready to go home  :'( :'( :'(

Will wait for a break so I don't get it too dirty again.

--
Dick

 

[padlock]

Looks cool.
Only comment I would offer is to extend the tailpiece to cover the frame tubes sticking out the back.
Or is it just the angle the pic was taken from?

Tried lots of different dimensions but this is what, to my eye, works best, frame rails were already shortened so I'll just chop a bit more off to suit.

FFFANARCKY

 

[ludiluka]

First ride with my sfc replica 

 

[sonomalaverda]

Not much. 91 degrees F here, and 102 in Sacramento up the road.

Had the builders round to quote to put a concrete slab at the back of the house to move accumulated storage from the garage to a shed to be built there, so I can claim more of garage for bikes / workshop.

 

[Yogi]

(congrats) (congrats) (congrats)

First ride with my sfc replica 

(congrats) (congrats) (congrats)

 

[chrisk]

(congrats) (congrats) (congrats)
(congrats) (congrats) (congrats)

(congrats) (congrats) (congrats) (congrats) (congrats)

 

[Terry Dymond]

(congrats) (congrats) (congrats) (congrats) (congrats) (congrats) (congrats) (congrats) (congrats)

 

[Laverdalothar]

+1

 

[hooksey]

You fellas will get the  (congrats) if ya keep that up 

Congratulations Ludiluka,  no greater feeling  8) sure you had a woody a cat couldnt scratch 

 

[chrisk]

You fellas will get the  (congrats) if ya keep that up 

Congratulations Ludiluka,  no greater feeling  8) sure you had a woody a cat couldnt scratch 

A woody a cat couldn't scratch? .......
(congrats) (congrats) (congrats) (congrats) (congrats) (congrats) (congrats) (congrats) (congrats) (congrats) (bolt)

 

[2volts]

Wasn't my Laverda... but I managed to drop a 5mm x 15 stainless hex socket head screw into RHS cylinder through the spark plug hole.
Took some head scratching and fruitless efforts to grab it, a break for dinner and a couple of wines, aha, vacuum cleaner!!
A few bits of plastic tube & hose & gaffa tape to reduce it down enough to fit down the plug hole, took a few tries but its out.
pete

 

[Yogi]

Wasn't my Laverda... but I managed to drop a 5mm x 15 stainless hex socket head screw into RHS cylinder through the spark plug hole.
Took some head scratching and fruitless efforts to grab it, a break for dinner and a couple of wines, aha, vacuum cleaner!!
A few bits of plastic tube & hose & gaffa tape to reduce it down enough to fit down the plug hole, took a few tries but its out.
pete

What a good save!

 

[hooksey]

Had the Konis off the Triple rebuilt by Greg @ Dam Laverda  8) and plonked them on the Twin.

Should help keep the sparks from the Banana to a minimum  thus prolonging its life 

 

[chrisk]

Had the Konis off the Triple rebuilt by Greg @ Dam Laverda  8) and plonked them on the Twin.

Should help keep the sparks from the Banana to a minimum  thus prolonging its life 

Sparks from the banana?

 

[rowdypat]

You're not thinking hard enough Chris.

Is there much left on that donor bike Dave? 

 

[hooksey]

Nice one Pat    should have the triples weight down to 210kgs about now  might drag its arse on the bitch of mine tho  :

Can still wheel it out and fire it  in the back yard and wake the neighbors      so still useful...............

 

[chrisk]

You're not thinking hard enough Chris.

Sorry Pat, I'm not used to reading messages from The Riddler, I'm not Batman!

 

[chrisk]

Just letting you know that the FNQ Club Lavetda netting is about to start at the Townsville Yatch Club.