RGS 'EXECUTIVE' TOURING HANDLEBARS WANTED

[Delhispearman]

Hello everyone.

Does anyone know where I might get hold of a pair of the higher 'touring' RGS 'bars?

If anyone has retro-fitted them l should be grateful for any tips.

Best to all in these difficult times.

Andrew

 

[Grant]

RGA or Executive bars.
You will need the appropriate dash pad too.
Cables and hoses need repositioning in order to make the extra stretch.
I have done it several times.

Try Wolfgang Haerter in Canada.

 

[Laverdian]

I?ve been on the hunt for a pair of RGA bars for months. Tried all the usual suspects including Wolfgang without luck. Wagner has them  but I?m not that desperate yet.

 

[a14rgs]

RGA or Executive bars.
Cables and hoses need repositioning in order to make the extra stretch.

Repositioning, but not replacing?
I ask as I have a pair of bars and dash pad here and am considering fitting them soon

 

[Grant]

I managed several times with this conversion by re-routing the clutch hose, choke and switchgear cables.
Can't recall if I had to get a longer hose from brake m/c to splitter box as the last 2 I did I fitted a modern m/c that had a brake switch built in, so I could run 2 individual hoses direct from m/c to the calipers.

 

[hooksey]

Definitely need longer hose from master to splitter 

As Grant says...... can re-jig/route all others to suit higher bars ! Boy is it worth doing..... ergonomics are great  8)

 

[Grant]

2014-04-08 16.55.23 by Grant Duguid, on Flickr

 

[Delhispearman]

Thank you all, this is most helpful.

How desperate does one have to be before buying from Wagner and who he?

Andrew

 

[The Sock]

How desperate does one have to be before buying from Wagner and who he?
Andrew

You don't have to be desperate, just being prepared to be 'previously wealthy' will do.

 

[a14rgs]

Thank you all, this is most helpful.

How desperate does one have to be before buying from Wagner and who he?

Andrew

https://www.laverda-paradies.de/shop-1000-86-en.html

 

[Delhispearman]

Thank you again.

Yes that conversion will be "reassuringly expensive".
But I 'spect you get an orange sharky-bottle-opener-thingy with every order...?

 

[Paul Marx]

Have you contacted van Dijk since you're in Holland?

Paul

 

[sideshow]

Thank you again.

Yes that conversion will be "reassuringly expensive".
But I 'spect you get an orange sharky-bottle-opener-thingy with every order...?

That has downsized to a beer coaster now

 

[Sir Sidney Ruffdiamond]

Can recommend the change - very comfortable - head slightly higher so screen deflects a bit to your helmet depending how tall you are - i am on one of Grants conversions

 

[CLEMTOG]

make your own, here's mine (not an RGS)

 

[Laverda SF]

I recommend finding either Suzuki or Honda 750 bars - Cut them to length - Same PROFILE !

Actually the Breganzie Factory used 70 Honda 750CBX bars for numerous years on their 750 SF (SFC) and early 3Cyls.

 

[Delhispearman]

Thank you all again for your comments. Very helpful. Andrew