SF750

[Fitz]

Is there a torque setting for the SF750 crank nut, I have been through my green book and buggered if I can see one - I have been known to miss things so down whinge at me

 

[Paul Marx]

Same as the triple, bloody tight.
Official figures are 10m/kg I seem to remember.

Paul

 

[Tippie]

As tight as your best rattle gun can get it.

 

[Paul Marx]

And a bit of Loctite.

Paul

 

[natm]

95 -100 Nm

 

[CLEMTOG]

up till it strips, then back half a turn.
CLEM

 

[sideshow]

up till it strips, then back half a turn.
CLEM

 

[Paul Marx]

95 -100 Nm

Got there first with 10kg/m.
1kg/m = 9.81 N/m



Paul

 

[sfcpiet]

As tight as your best rattle gun can get it.

Careful with that statement Lee, mine would strip it straight off!

Thankfully, the thread in the nut is weaker than that on the crank, the nut will be the first to go.

piet