SFC style fairing mounts, headlight and fittings, rear-sets and linkages, clipons all for SF1.

[chrissoz]

I am in the process of a bit of (reversible) restyling of my SF1. So far I have obtained an SFC fairing (sans screen and headlight) which I am in the process of tidying up and some rear-set mounting plates are on their way. I don't want any thing too shiny as that will just show up the rest of the bike! Has anyone in Australia got any of these bit sitting around that they are willing to part with? Hole for headlight is around 210mm but not even sure if this is a standard size for an SFC fairing.

Thanks

Chris

 

[chrisk]

You need, https://www.ebay.com.au/itm/Vw-Golf...896282?hash=item3ce9a44b5a:g:3rkAAOSwGvhUBzl5

Perfect fit and a UK one will dress to the left.

And you need the fucking rubber ring. Usual Laverda parts suppliers.
Have fun fitting the fucking ring

Andy Wagner has the fairing mounts and brackets in stock.

 

[chrissoz]

I know I can get the mounts and brackets and other bits from Andy (or Greg) just seeing if there are any kicking around in Oz before putting in the order. Greg seems to think that my fairing has had some of the headlight mounting chopped off. I does not have a step in it just a big hole. Will probably just get that unit and think about 3d printing some parts to fit.

 

[chrisk]

No step? Then the fucking rubber and that VW headlight won’t fit then, needs the rear part of the step to bolt to.

 

[piranha-bro2]

If you can source some Tomaselli or Magura alloy clipons in 38mm it's easy to sleeve them down for the 35mm SF1 forks. They are a nice handlebar. Linkages you can make yourself using rose joints from any bearing supplier. I make my own pegs, but the hard part will be gear and brake (drum) levers.