SOLD: Laverda 180 Series 2 Endurance Project (UK)

[RetroRacer]

Looking to sell my Laverda 180 Endurance project. Originally sourced from Renato, Moto Officina from Italy as a matching numbers and running bike. Very first registration was in France. Sudden change of life priorities unfortunately forces me to sell.

The bike is currently in a workshop in West London, but can be colle

About the bike/parts:
- V5 / Registered
- 4C cams
- Boba carbon fibre tank (stainless cap), fairing (clear screen, yoke braket + bolt included), seat and mudguard
- Carbs ultrasonically cleaned and revamped (+ clear fuel lines/clips in a box)
- Black 3-1 exhaust ceracoated
- Magura clip ons
- New Digital Ignition in a box
- Front forks fully rebuilt
- New tyres
- New 530 chain and sprockets
- Marzocchi rear shocks rebuilt
- Grant’s side stand
- DAM easy cultch with bottle opener
- Veglia rev counter + custom Venhil cable
- Gold brakes + new Brembo pads
- X2 yellow and white Marchal headlights + endurance bracket
- Tarozzi rear sets
- New grips + throttle tube

Engine has compression, and gears go in. However, it’ll need rewire, fabrication for front fairing brackets, frame repainting and just recommissioning, of course.

A lot of the above parts are in a box, but I can provide more info + photos.

Not looking to sell parts individually.

£8500 ONO, will take offers.

See my comment below for link to video of it running before work started.

 

[RetroRacer]

I digged up the video that was sent to me before I bought it with it running. Picture/sound quality is not greatest - was recorded on an old phone. See comments section on the Laverda Facebook group: https://www.facebook.com/groups/iloc1/posts/3546532508914922/

 

[RetroRacer]

SOLD.