Steel airbox plate (no holes) with bulge for 1969 750 S OR GOOD reproduction

[EncinoBoy]

Hopefully I can find one that can be refinished. Laverda Paradies shows a picture of
the part in Chapter 14 number 54C on the 750 page BUT lists it as unavailable. If a
correct reproduction is available please provide the suppliers name. Thanks.

 

[Paul Marx]

There is no airbox.
You'll have to find the part used.
Paul

 

[chrissoz]

This thing - have had it sat on my shelf for a while - came on my sf1 but had to be removed for the pod filters.

 

[piranha-bro2]

Not a standard SF1 part, Chris. Not sure what that's off! And you can actually use a std SF1/2/3 airbox and rubber inlets and mount your pod filters into the rubbers, behind where the original box filter used to fit. But you need to cut it up so all that's left is the front 'plate' that then separates the carb from the filters

 

[Normski]

I think Chris’s part is the correct part which Encinitas boy needs for his S
Here‘s what I have for mine.

 

[EncinoBoy]

This thing - have had it sat on my shelf for a while - came on my sf1 but had to be removed for the pod filters.View attachment 85693

chrissoz: That looks exactly like the part I need. An extra drilled hole and "L"
bracket missing (?)....no problem. E-mail me and lets get a deal done. I am
located in W. Canada. Thanks
p.s. I can't seem to include my e-mail address for direct contact

 

[piranha-bro2]

so for an S - but not SF1.

 

[MarnixSFC]

so for an S - but not SF1.

The S (or 71/72 SF) plate won’t even fit an SF1 frame, will need to weld brackets to the frame.

Marnix

 

[EncinoBoy]

Old EncinoBoy luckily has as AE with the "S" stamping on the gusset. Good as
always to know the brain trust is close by...

 

[chrissoz]

I am not sure how it was attached to the SF1 - was defiantly on it when it arrived but removed almost immediately to fit the pods - anyway will be winging its way to US and not cluttering up my shed.