witt dmc 2 English instructions ?

troutbishop

troutbishop

Hero member
Location
Worcestershire England
Hi all just bought a witt DMC2 all the instructions are in German previous owner couldn't get on with it so bought a pazon kit does anyone have instructions in English and is there any way of checking it out to see if its ok ?
                                    Cheers Kev
 
Kev

For a Series 2, http://laverdapedia.com/images/5/5e/DMC2VR.pdf and http://laverdamania.net/images/Dmc_1000_120.pdf. Use Google translator for the bits in languages other than English.
There used to be a translation that also included Series 1 machines on one of the other Laverda forums ( ::)) but I couldn't find it, only a reference to a dead Laverdapedia link. Try their archives, I think you're a paid up member.

Ken
 
Many thanks Ken some one is sending me a set of English instructions  ;) Do these systems make much difference to the bikes?
                                                cheers Kev
 
troutbishop said:
Do these systems make much difference to the bikes?
                                                cheers Kev
Click to expand...

Kev

Yes, for me a big difference on the RGS, starting is now a joy and the fact that the motor will idle at 1000rpm is a first. Now pulls (smoother running too) better across the rev range haven't hit the limiter yet though.  :D

Graham
 
eliminates the harsh advance change between 2.700 and 3.000 or so, which you recognize when in traffic, 3 rd gear at roughly 30MpH/50Km/h in touring mode...

Haven't had any fooled spark ever since I installed the DMC to both the SFC 1000, the 750SF and the Jota. Big improvement! Make sure though you install it 100% according to the instruction, which is idiot-proof to be correct (guess by whom... - me, the electronic dummy...)  ;)
 
You must log in or register to reply here.
Back
Top