Latest activity

What's new Featured content New posts New media New media comments New resources Latest activity
  • MarnixSFC
    MarnixSFC reacted to piranha-bro2's post in the thread 750SF2 main stand - too short? with Like Like.
    If you're going to go to that much trouble you may as well make the stand height adjustable. When I was making mine I decided to go a...
  • V
    Vince replied to the thread Back on the spanners.
    Atlas clutch plate job. I have all the bits and the factory manual.
  • Andy
    Andy reacted to Dellortoman's post in the thread Getting Old with Like Like.
    Thanks everyone for the well wishes. I'm back at home and doing fine. Actually feel better than I have for a few weeks. I reckon that...
  • The Sock
    The Sock reacted to martymoose's post in the thread Back on the spanners with Like Like.
    After a 12 month holiday from being a mechanic, I am going back on the spanners, working from home. First job is to get my bikes back...
  • Schurminater
    Schurminater reacted to Dellortoman's post in the thread Getting Old with Like Like.
    Thanks everyone for the well wishes. I'm back at home and doing fine. Actually feel better than I have for a few weeks. I reckon that...
  • Schurminater
    Schurminater reacted to martymoose's post in the thread Back on the spanners with Like Like.
    After a 12 month holiday from being a mechanic, I am going back on the spanners, working from home. First job is to get my bikes back...
  • martymoose
    martymoose posted the thread Back on the spanners in General Discussion.
    After a 12 month holiday from being a mechanic, I am going back on the spanners, working from home. First job is to get my bikes back...
  • piranha-bro2
    piranha-bro2 replied to the thread 750SF2 main stand - too short?.
    Thought the same thing about the overbuild, but they do have strong springs. I just but weld 3mm pipe - a good weld and it's strong as...
  • The Sock
    The Sock reacted to Dellortoman's post in the thread Getting Old with Like Like.
    Thanks everyone for the well wishes. I'm back at home and doing fine. Actually feel better than I have for a few weeks. I reckon that...
  • M
    MotoV reacted to cape's resource Any "Ground plate" for side stand stl file with Like Like.
    as per image...
  • M
    MotoV reviewed the resource 180 triple Airbox Backplate.
    5.00 star(s) Is it 3 piece to make it fit on a build plate?
  • Andy
    Andy reacted to Vince's post in the thread High Beam dash light with Like Like.
    130W90 H4 with a relay, apparently for competition use only, you just need to aim them carefully. The first time I used it in the bush...
  • V
    Vince replied to the thread High Beam dash light.
    The height of 4-wheel drive with dazzling white lights is hard to take around my place, even on low beam. I cannot remember where I got...
  • 1200ts
    1200ts replied to the thread Tubeless tires?.
    So what I am reading. A 1976 Jota with thin web wheels and running tubeless gets a puncture = tire comes off the rim and you are dead...
  • Dellortoman
    Dellortoman replied to the thread 750SF2 main stand - too short?.
    Nice neat job Mike, although I think you may have added more weight than necessary. The spigot on your extension was longer than...
Show older items
Back
Top