Clutch Push Rod

Anyone know why the variation in cable free length??? Twins, triples, all use the same mech and lever.
I'd assume the different cables would suit different handlebar levers. Early 750 had Verlicchi, then Lucas along with the drummer triples and then the Tomaselli for all.

At first glance, the cables are all the same.

piet
 
I spent several years working with Venhill to try to develop a better clutch cable than the ones they were supplying. The two biggest problems were that they were using nipples and bottom adjusters from a limited range and that modern cables, like chains, are stronger and consequently thinner cables can be used.
They also had taken their pattern from old stretched cables, not from new OEM ones.

Thinner cables I discovered, because of their increased flexibility, require a longer length to sit comfortably.

Venhill were able to provide a shorter bottom adjuster but their top trumpet and barrel nipples weren't up to the job.
I had JJ Cables, Fir Tree Farm, Fir Tree Barn Lane, Warmington, Banbury, OX17 1JL, England. Phone+44 1295 971170,
make new inners, with a far better top nipple, and the cables now work well on mine (adjustable handlebars, set low).

2023 05 28 03.jpg
Dimensions below:

Total Length:
Clutch Cable Total Length.jpg

Inner Free Length:Clutch Inner Cable Free Length.jpg

Bottom Adjuster length:
Clutch Bottom Adjuster Length.jpg

Cable Outer Diameter:
Clutch Cable Outer Diameter.jpg

Inner Diameter:
Clutch Inner Cable Dim.jpg
Hope this helps?
 
Last edited:
Our club stock comes from Wolfgang. I think this one slipped through quality control as Brett only has shorter ones. Luckily I didn't need it on the trip around Oz, I had it as my spare, would have been useless.
 
Our club stock comes from Wolfgang. I think this one slipped through quality control as Brett only has shorter ones. Luckily I didn't need it on the trip around Oz, I had it as my spare, would have been useless.
Always a bush mechanics way around a prob to get you home, Marty! Eg, wind some fencing wire around it to reduce end freeplay :cool:
 
Just got off the phone with a mate, Sam, who's been everywhere, and I was surprised to hear him say the main road to the Tip of Cape York from Carnes is fully blacktop all the way, except for a few short bits. That really surprised me. Still plenty of dirt, but that's off the main road and on specific tracks, e.g., the Telegraph Track. So why do I keep hearing of 2,000 km of badly corrugated dirt on the main road?
 
I googled it, and just like everywhere in Oz, over the decades they seal bits in chunks. I very much doubt it's all bitumen. When I was a kid, the dirt started at Singleton 60 years ago, and that's approx. 150 km west of Sydney. I was surprised to hear that, and I still find it hard to believe, considering the monsoon season they get up there. I know a bunch of people who have done the trip to the tip over the decades, 2 got evacuated with broken legs back in the day. It's a tough ride from all accounts.
 
A friend did it a few months ago on his Guzzi Stelvio adventure bike. I can ask him - he will know everything about it. He posted daily reports and pics on FB and I definitely did not get the impression that he was cruising on bitumen. I know he didn't do that insane bit of the Telegraph Track or whatever that one with the 3m deep 'ruts' that the 4wd monkeys like to test their skills on. Maurizio will tell you how dangerous some of the extreme routes can be - in fact he can tell us exactly what the routes are like! Having done it on a KLR650 within the last 2 or 3 years.

My impression was it was a quite reasonable dry weather dirt road, but not something you'd take a 3C on. There were water crossings but not crazy ones.He also detoured a lot to check out different places.
 
Back
Top