Gravelroad
Hero member
- Location
- Central Europe
Instead the use of snake oil I would recommend to drop the fresh oil after 50km or even right after you got the first full heat cycle on the engine. Don't know about the twins, but the early triples need the primary case to be drained separately, otherwise the old muck would stay in there.
With storage time of 10yrs, roller bearings inside the engine might be affected by corrosion, too. especially when the bike has rested with used (sour) oil fill, and the engine never being turned during storage. This stillstand bearing corrosion might not lead to immediate engine failure, but will reduce overall lifetime of the bearings. The corrosion residues will start to come off the bearings right after running the engine from storage, another good reason to replace the fresh oil fill after short usage.
With storage time of 10yrs, roller bearings inside the engine might be affected by corrosion, too. especially when the bike has rested with used (sour) oil fill, and the engine never being turned during storage. This stillstand bearing corrosion might not lead to immediate engine failure, but will reduce overall lifetime of the bearings. The corrosion residues will start to come off the bearings right after running the engine from storage, another good reason to replace the fresh oil fill after short usage.