SFC frame refinishing

Thank you for all the replies.

Seems like zinc plating is not as hard to find as I was previously led to believe. So that is good news, and sounds like the way to go.

I will be checking into some of the local-ish providers, as shipping a frame would get expensive in a hurry, and the possibility of damage to an essentially irreplaceable item is unacceptable.
 
Phew.
It's not irreplaceable. Lovely new frames are available.
You could even stamp the original numbers.

Or build a replica with the original numbers and sell it with the original documents.
Has been done.
Money brings out the best in people.

Paul
 
Paul--
Thank you. I honestly would not have imagined that unstamped frames would be available 46 years later.
Not sure how I would find the correct stamps to reproduce the original stampings.

My intent is not to replicate an original bike, but to keep an original bike as close to original as reasonably possible.
All that said, I will try to keep the original frame and have it re-done in the original manner.

Thanks to the posts on this thread, I have found a local plater who is somewhat reluctant, but willing to try.
I will update the board on the results when I get that done.

Best regards, Rich
 
I would be a bit reluctant to let someone practice on my precious frame, I would personally stick it out until I found someone with a good track record of doing that type of work on bike frames. It?s a bit like going for surgery and finding out the surgeon has never operated on anyone before. I?d prefer one who can say I?ve done this operation countless times and I haven?t had to bury anyone yet....
 
orionengnr said:
....I honestly would not have imagined that unstamped frames would be available 46 years later.
Not sure how I would find the correct stamps to reproduce the original stampings.

The following pictures are not older than about 5 years. Good work in my opinion. Builder shoud have died in 2018 or 2019.
I would never made such a professional tool to produce such frames only for making 5 or 10 frames.

You will find nearly identical (used) stamps in ebay. Incl. the round base on the botom of the number (only important to get the "original" mark for the motor-number on the alloy).

Best Thomas aus LAU

62160839_328626114685459_2414029110818776713_n.jpg


59927150_1530986430371624_3770473410094846136_n.jpg


60171398_670626013351419_8140174026567752856_n.jpg


60539738_167593667577252_5325065541783721559_n.jpg
 
Try Giuseppe Andrighetto in Maragnole or the ubiquitous Ricardo Oro in Breganze.
Maybe Angelo Cleva at Moto Officina in Spilimbergo could supply a frame. He's built a few replicas.

Paul
 
What are those three pics of my (SFQ) frame doing in that post?? I recognise my own child when I see it! Did I post all of them? I know I posted one. They do show the work of a truly talented welder though.
 
Piranha Brother 2 said:
What are those three pics of my (SFQ) frame doing in that post?? I recognise my own child when I see it! Did I post all of them? I know I posted one. They do show the work of a truly talented welder though.

Are you dead?

Paul
 
Think an SFC frame would look nice made of stainless - my Palmelli looks like it's nickel coated - but finish will not wear away - Regards -Phil
 

Attachments

  • palm small.jpg
    palm small.jpg
    161.5 KB · Views: 173
Ah, OK. I think I'm getting there ... bear with me  :D

You can see why i was confused, because the pic of the crazy jig with the frame in it has absolutely nothing to do with the three pics of MY frame in MY jig ... and I'm not dead, so didn't make the cnxn.
 
Thomas aus LAU said:
I have never said, that you are the creator of this crazy jig  :-)

Best Thomas aus LAU

p.s. I?m still looking where i got the pictures and informations. The guy made although perfect replica-frames for old Desmos.

Absolutely true, Thomas! It was others who made the connection  :D
 
Thomas aus LAU said:
p.s. I?m still looking where i got the pictures and informations. The guy made although perfect replica-frames for old Desmos.

About Oktober 2019 the seller "speedshop059" offered in Italy a original SFC-certificate but without the original frame.
After many emails i had these informations:
- the seller said, that the original frame was stolen in the workshop of Adriano Zanoni alias TARAKI (Artist-name).
- Adriano Zanoni, a genius welder died in 2017

The original link where i got the pictures and other informations does?t work anymore.

Here is another Link: https://www.facebook.com/media/set/?set=a.508859485833210.139223.148464471872715&type=3

Mr. Zanoni was well known in this forum: https://www.laverdaforum.com/forum/index.php?topic=89928.0

Best Thomas aus LAU

 
Back
Top