Latest activity
-
we went through 9 fiberglass fuel tanks as they kept splitting on the bottom edge where the seam was before I worked out it was the... -
If you are contacted by a user who has recently joined LaverdaForum / hasn't posted before / knows a mate who has what you're after /... -
RGSFC replied to the thread LAVERDA 1000 SFC Superleggera Part one.Yes Lothar, I checked it all (with my limited electric skills) There is power to the DMC and the coils, and the big plug looks perfect... -
redax5 replied to the thread TT1 4 Hour Endurance racing.we went through 9 fiberglass fuel tanks as they kept splitting on the bottom edge where the seam was before I worked out it was the... -
Properly set up, the P08 calipers are quite adequate for road use. Of course, "better" is always the foe of the "good"... A useful... -
sfcpiet replied to the thread What calipers are these?.Properly set up, the P08 calipers are quite adequate for road use. Of course, "better" is always the foe of the "good"... A useful... -
-
Laverdalothar replied to the thread LAVERDA 1000 SFC Superleggera Part one.So - what were the results, please - you have measured current on the plus wire at the DMC and at the wire on the coils, ground... -
Laverdalothar reacted to RGSFC's post in the thread LAVERDA 1000 SFC Superleggera Part one with
Like.
So far I haven’t found any faults at all. Even the multiplug from the DMC looks perfect. I will request the help of a friend that is... -
PopsYoshi replied to the thread What calipers are these?.To be honest I think the braking system is fine and just the pads have glazed over or I'm expecting too much from them. We will see when... -
PopsYoshi replied to the thread What calipers are these?.Thanks for your reply. First I am going to fir these Lucas sintered pads. Hopefully they'll fit though now after your post, I'm not too...
-
PopsYoshi replied to the thread What calipers are these?.So they had no dust covers either then? Cheers, Jon.
-
PopsYoshi replied to the thread What calipers are these?.Is Ducati Paddy still active here? He wanted to buy these calipers off the owner that I bought the bike off because they were as rare as...
-
FDon't know if this has been posted before, but if your bike's clutch is getting heavier, & oiling or replacing cable didn't improve...
-
-
PopsYoshi replied to the thread What calipers are these?.What 4 piston calipers would fit the 3C forks though? Do I have much choice? Cheers, Jon.
-
If you really want to upgrade your braking fit a set of 4 piston calipers and matching master cylinder.
