This bloody bike. 1976 3CE

[motoddrob]

when I fitted the Axtel cams to A11 sprockets I measured the exhaust out by 6deg and inlet 3deg at the crank.

 

[rocketonarail]

It was a bit tongue in cheek but some people take every comment serious

......... should be seriously ............. ..................

 

[rocketonarail]

Sorry Rob ..... couldn`t resist it ......................

 

[3cJoe]

A11 cams and 4C timing wheels?

please dont forget that there are many cams that started life as A11's but were built up and reground as 4C, plenty of those never did get the "A11" ground off and the "4C" stamped nearby. it is also possible to redrill the A11 cam wheels for the different configerationof the 4C, there are diagrams available to do this if you are a competent mill operator.
CLEM

Hi Clem - can you point me to where these drawings are located please ?

 

[andre g]

Hi Clem - can you point me to where these drawings are located please ?

Have a look to the library…

 

[Rob]

- can you point me to where these drawings are located please ?

Cam sprocket drawings

laverdaforum.com