Tippie
Hero member
- Location
- Dr?bak, Norway
Gets lighter with heat too. Buy it cold and sell it hot and skim the cream.Fuel is actually 0,74 Kgs/Liter according to my google results, so 200 minus 18,5 = 181,5 dry.
Gets lighter with heat too. Buy it cold and sell it hot and skim the cream.Fuel is actually 0,74 Kgs/Liter according to my google results, so 200 minus 18,5 = 181,5 dry.
Fuel will also expand when it gets hot, ask any old bevel duc owner who has filled it to the brim.Gets lighter with heat too. Buy it cold and sell it hot and skim the cream.
My bikes can be heavy, I am 85 Kg115kg, I wish.
Hi Piet, I just contacted another Spondon Jota owner in Oz to find out if his bike had ever been weighed.I also very much doubt a total weight of 171kg... not even attainable if the entire charging, lighting and starter system are ditched, as Red has explained with his very trick race bike. The weight distribution is also very suspect, reckon there's a good 20kg missing from the front. 108kg rear equals 63%, stock faired triples come out at around 52-53% rear iIrc, total weight being close to 245kg with oil and a half-tank fuel load.
I see heavy wheels with tubed(?) tyres, handlebars, switchgear, instruments and bracketry, horns, brake line splitter on the Spondon, so there's definitely scope for improvement. Anything under 200kg would be pretty damn good if using a Laverda triple as drive unit.
My own 3C underwent a long and tedious weightwatchers program, now at 215kg and 52/48% F/R bias with a half-full tank and complete road equipment. Did manage to get it down to around 205 at one stage, but many of the lightweight bits quickly fractured, so I beefed it all up a bit again. Paring 5kg from the engine alone was one royal pita, it don't come easy... No exotic materials have been used, all good ole' fashioned aluminium alloy, steel and fiberglass, reckon a further 2-3kg might be able to be saved if some larger bits are replaced with titanium and carbon fibre. Re-framing might save a further 8-12kg, but that's out of the question for me at my age.
Side note; mate always jeered on how heavy the jap competitors of the Laverdas were. One fine day we had a stock Honda K2 750-4 in the shop, next to his own SF3 and a bunch of triples to choose from. Turned out the SF3 was a whopping(!) 4 kg lighter than the Honda, pretty much debunking most of his arguments.
piet
Spot-on Vince. As you say, small worldThat is probably Richards Spondon, ex-Mark M. Small Laverda world, especially in Oz. I really like their aligned swingarm pivot and countershaft idea. Also there oval frame members, the beam might be stiffer but it hides the engine too much.
I'm over it now Marty. T'was a time when it really mattered... emphasis is now on reliability and comfort.All this drilling and weighing. I just want to ride, too many roads I haven't seen yet. Waste of time for me, even after a good shit I'm still 115kg......
And 4 in the UK, but no-one seems able to say for certain how many originallyThere is another Spondon triple in South Australia I know this because I have the engine for it in my workshop.![]()
I wish I would be around 90 Kilos really, Piet... feel blessed...Finding it difficult to stay under 90kg these days. Why isn't everything as easy as getting fat??
piet
Be careful Lothar or the guillotine might come after you.Better for us, yes, but to safe weight on the Laverda is relatively easy: Lots of heavy components that can be easily replaced with lighter ones...
I can lose roughly 10 Kilos just by exchanging the battery. Takes about 30 Minutes max. Show me how to lose 10 Kilos on my body in a week, and you are my heror.![]()
![]()